Nakamichi Dragon - household [comm. 1] cassette recorder-set-top box (deck), produced by the Japanese company Nakamichi from 1982 to 1993 [1] . Preserving the reference sound quality of previous Nakamichi flagship models, Dragon differed from them by the function of auto-reverse in playback mode (recording was performed in only one direction). The main feature of Dragon was a system of continuous automatic correction of skew ("azimuth" ) of the playback head, eliminating distortions of the tape in the tape channel. Designed by Philips and advanced Niro Nakamichi system turned Dragon into a universal player that can correctly play tapes recorded on other, imperfectly tuned tape recorders. In addition to Dragon, such automation was installed in household tape recorders only twice - in the Marantz SD-930 models and Nakamichi TD-1200 .
| Nakamichi dragon | |
|---|---|
| Household [comm. 1] cassette tape recorder | |
| Manufacturer | Nakamichi |
| Constructors | Niro nakamiti Kozo Kobayashi |
| Years of release | 1982 - 1993 [1] |
| Tape Drive | Five-motor, direct drive, auto reverse in playback mode |
| Head configuration | Three separate heads |
| Noise reduction | Dual UWB Dolby B / C |
| Recording Channel Setting | Manual on two indicators (recording level, bias current) |
| Playback Channel Setting | Automatic skew correction |
At the time of release, Dragon had a record low knock coefficient and record high dynamic range ; the range of reproduced frequencies was only slightly inferior to the predecessor already discontinued - Nakamichi 1000 ZXL . Journalists and experts of the 1980s recognized Dragon as the best cassette recorder - the standard with which the best models of competitors unsuccessfully competed . The reputation of Nakamichi Dragon remains unsurpassed in the 21st century, despite the objectively worse reliability of the tape drive than the less complex Nakamichi models .
Design and Production
Background
In 1963, Philips introduced a new format for audio media - a compact cassette [3] . In the early years, the use of cassettes was limited to voice recorders and low-cost, low-quality household tape recorders. The inherent drawbacks of the format — the low speed of the tape and the small width of the magnetic tracks — did not allow it to compete on equal terms with long-playing plates and magnetic tape on reels [4] . Ten years later, in 1973, the situation changed dramatically: the little-known Japanese company Nakamichi launched the Nakamichi 1000 stationary cassette recorder, which can compete on equal terms with both household and semi-professional reel devices [5] [6] . While the competitors' best cassette recorders could not reproduce frequencies above 12 kHz on regular or 14 kHz on chromium dioxide tape, Nakamichi 1000 confidently reproduced the entire sound range up to 20 kHz [7] [8] . The device, for the first time in the history of cassette technology, was equipped with a through path with separate recording and playback heads [comm. 2] , a two-shaft tape drive mechanism [comm. 3] with the possibility of operational [comm. 4] adjusting the "azimuth" (angle of installation of the playback head) and means of tuning ("calibration") the recording channel on the tape used [12] [8] .
While competitors sought to get closer to the characteristics of the younger Nakamichi models, the company continued to research and in 1981 launched the new flagship, Nakamichi 1000 ZXL [13] . As the future showed, in this model, Nakamichi designers reached the technological ceiling, having exhausted all the reserves of an imperfect format [14] . Slightly inferior to competitors in the level of detonation and dynamic range , the 1000 ZXL had a record, unmatched frequency range for recording and playback and record low non-linear distortion, with musicality characteristic of early Nakamichi [15] . However, the price of 1000 ZXL was extremely high for the consumer market, and the “gold” version of 1000 ZXL Limited, released a year later, became the most expensive serial cassette in history ($ 6,000) [16] . Level or two below them were the models of the younger families, built around the same unified, developed in 1978, two-shaft tape drive mechanism [17] [18] . From time to time, the company produced experimental, unconventional products [comm. 5] , but generally followed a conservative approach to design and did not seek to copy the latest competitor solutions [22] . Nakamichi basically did not use dynamic magnetization [23] , and until 1982 did not produce models with the auto reverse function. The main obstacle to the creation of a truly high-quality auto-reverse mechanism was the fatal problems with the distortions of the rotary head block [24] , which led to the blockage of high frequencies on one side, and sometimes on both sides of the cassette [25] .
Skew Problem
The gaps of the magnetic heads of the recording and playback of any tape recorder - narrow slots of micron width - should be oriented strictly perpendicular to the axial line of the tape [26] . The distortion of the angle of installation of the heads (in the documentation of the manufacturers " azimuth ", eng. Azimuth ) generates a characteristic blockage of high frequencies, which cannot be compensated by tone controls [27] . In stereo cassette [comm. 6] tape recorder tangible blockage is observed even at a skew of 5 arc minutes [29] . In a high-quality tape recorder, the permissible skew should not exceed 6 arc minutes [30] ; in practice, distortions of 10 arcminutes are more common when the signal with a frequency of 20 kHz is attenuated by about 10 dB [31] . With further deterioration of the "azimuth" to 20 arc minutes, reproduction of high frequencies becomes almost impossible [28] [comm. 7] . In practice, the "azimuth" may have a different nature:
- Misalignment of the recording head gives rise to tape incompatibility: a tape recorded on a tape recorder with a slanted recording head cannot be correctly played back on another tape recorder;
- Skewing the playback head makes it impossible to correctly play back tapes recorded on other tape recorders;
- Skew of the tape in the tape channel is just as undesirable. These distortions are common to all cassette recorders, since the cassette itself serves as a tape drive [32] . Often there is an asymmetric skew, in which one side of the cassette is reproduced noticeably worse than the other [25] ; less often the dependence of skew on the degree of rewinding of the tape within one side of the cartridge [33] .
Autoreverse tape recorders are most susceptible to asymmetric distortions [34] [25] [35] . In simple wearable ( photo ) and car ( photo ) auto-reverse players with a fixed four-track playback head, such distortions are usually not amenable to correction [36] . Such heads were not used in recording cassette recorders because of the difficulty of placing a double set of erasing heads in a limited space of the tape channel (in tape recorders with a through channel, in addition to them, two separate recording heads were required) [37] [comm. 2] . A more flexible scheme with a rotary head block allows independent adjustment in both directions, however, due to periodic shocks when turning the head block, they soon again deviate from the optimal position [24] .
The main way to eliminate distortions - periodic alignment of the heads on the reference measuring tape [38] - is necessary, but not enough: the adjustment eliminates the misalignment of the heads, but cannot correct the distortion of the tape [39] . A partial solution to the problem was the manual and automated mechanisms for the operational adjustment of the "azimuth" during recording, which have been used since 1973 in the flagship Nakamichi models [40] . However, all devices intended for recording were useless when playing back tapes recorded on other tape recorders [41] .
Finding a solution
In 1976, American John Jenkins of International Tapetronics [comm. 8] patented a system for automatic skew adjustment for multi-track (studio) tape recorders. In the Jenkins tape recorder, two selected magnetic tracks were used for this purpose, on which a reference sinusoidal signal should be recorded. With a perfectly tuned head, the signals read from two tracks are identical; when the magnetic gaps are skewed relative to the strokes recorded on the tape, a differential error signal arises. The automatic control system responds to an error signal by adjusting the head angle using a drive based on a DC motor . Thus, during playback (and only during playback) the tape recorder is able to continuously eliminate distortions of any nature [46] .
In 1978, Philips designers Albert Riykart and Edmond de Neath invented the principle of detecting head skew, which does not require the allocation of tracks for recording a reference signal. According to the inventors, the phonogram itself on magnetic tape should have served them. Riikart and de Nit proposed to read each of the phonogram channels not by one, but by two magnetic systems, each of which would read its half of the track. The magnetic gaps of the two systems should be positioned vertically one above the other so that the “pie” [comm. 9] of the two subsystems accurately overlapped the track. An error signal was the time shift of signals recorded by two systems [48] . A year later, Rijkart and de Nit patented a complete automatic control system with an actuator based on a piezoelectric transducer [49] .
The practical design of the “pie” inscribed in the dimensions of the magnetic track of the compact cassette (only 0.6 mm [50] ) was the subject of a patent application filed by Niro Nakamiti in November 1981. The cores of the Nakamiti magnetic subsystems were composed of packs approximately 0.2 mm and 0.4 mm thick , stacked in a checkerboard pattern; windings of the upper and lower subsystems were wound into grooves formed on the inner surfaces of thick packets. The NAAC automatic control system described in the patent (Nakamichi Auto Azimuth Correction) analyzed a difference signal in the band from 2 to 8 kHz ; the error detector was set by a diode limiter. An actuator based on a direct current electric motor moved the head by means of a complex mechanical transmission closed to a wedge-shaped pusher of the head [42] .
Nakamiti believed that the automation of a stereo tape recorder should only respond to the phase-difference signal of the internal track (right channel), since the external track (left channel) of the compact cassette is too susceptible to mechanical damage and therefore cannot serve as a reliable indicator of skew [43] . Thus, in a “normal” (non-reverse) NAAC system playback head, three magnetic systems (one standard and two half-width) should be placed, and six in the auto-reverse head [43] .
Market Entry
| External video files | |
|---|---|
| Tape recorders with automatic azimuth correction systems | |
| Nakamichi dragon | |
| Marantz sd-930 | |
| Nakamichi TD-1200 | |
| External video files | |
|---|---|
| Tape recorders - Dragon competitors | |
| ASC 3000 | |
| Tanberg 3014 | |
| Harman-Kardon CD491 | |
In November 1982 [51], the inventions of Riykart, de Nita, and Nakamiti were embodied in the Nakamichi Dragon, and in 1983 it was followed by the Marantz SD-930 deck with the MAAC proprietary Philips system ( English Marantz Auto Azimuth Correction ). The Marantz SD-930 did not have auto-reverse, and used “sandwiches” in both stereo channels of a two-track (actually four-channel) playback head. The head angle was controlled by a piezoelectric transducer [52] [53] . The shortly produced soundboard remained out of sight of the press; in a comparative review of eight flagship decks by West German magazine Audio, the SD-930 finished last [54] [comm. 10] .
The fate of Nakamichi Dragon was completely different. The deck, which took the flagship place in the company’s lineup, which previously belonged to the 1000 ZXL model and cost “only” $ 1850 in the US market, immediately received exceptionally high press ratings . For many years, Dragon became the standard with which competed and compared the best models of other manufacturers [55] [56] . Tandberg 3014 , Revox B215 , the flagship models TEAC and Aiwa claimed the role of “ dragon winner ”; competitors beat Dragon in separate “nominations” every now and again, but no one managed to get closer to the combination of sound quality and technological level achieved by Nakamichi [55] . Automatic adjustment of the "azimuth", which eliminated the problem of compatibility of tapes, forever remained the signature feature of Nakamichi [57] .
In 1985, with the launch of the Nakamichi Dragon-CT vinyl record player, the phrase Nakamichi Dragon became a sub-brand [58] . The line of cassette Nakamichi Dragon turned out to be a dead end: Probably, the production of tape drives of the NAAC system and their after-sales service proved extremely difficult for the company [59] . After the release in 1983 of the TD-1200 auto-reverse car radio equipped with the NAAC system [60] , the company no longer designed or produced such devices. The second family of Nakamichi auto-reverse decks, released in 1983-1984, used a fundamentally different auto-reverse mechanism, with the physical turning of the cassette [61] . Released in 1986, the non-reversible Nakamichi CR-7, which took the place of the “second flagship” along with Dragon, was equipped not with automatic, but with manual adjustment of the “azimuth” during playback [62] [comm. 11] . By 1988, the development of new tape recorders of this level stopped forever [63] . It never brought profit to manufacturers (status models were a kind of concession to a few, but influential engineers and experts), and by 1988 had become an unacceptably costly enterprise [64] . Improving an analog tape recorder, if it was possible in principle, required investments in applied science , but the scientific and financial resources of corporations were already redirected to digital technologies [65] .
In 1990, Nakamichi discontinued classic models, replacing them with simplified versions with tape drives purchased on the side, but Dragon remained in the production program until 1993 [66] ; sales in Japan continued until 1994 [53] . The number of Dragon released is not known reliably, but, taking into account eleven years of production, the global distribution network and the reputation of the model, it was very high for such an expensive product [53] [comm. 12] . In 1996, the company, which failed to cope with the increase in labor costs of Japanese assemblers, ceased production of simplified models of the DR series [69] . The digital magnetic recording format that the company relied on did not take root in the market [70] , and in January 1997 the Nakamiti family sold the extinct business to Chinese [71] .
Design Features
Appearance. Ergonomics
The front panel of the Nakamichi Dragon, dating back to the ZX-7 and ZX-9 models, differs from them in a different arrangement of the recording level indicator and secondary switches. Large-sized control keys for the CVL and calibration have become embossed; Browser Stereo Review compared them with overhanging rows of roof tiles [72] . In general, observers considered the Dragon control ergonomics successful, with the exception of a number of minor flaws [73] [74] . In a deep but narrow window of the cassette receiver, the cassette is poorly visible [75] ; the state of small black buttons is difficult to read, especially the noise reduction buttons and the frequency correction time constant critical for sound quality [76] . The error of the LED level indicator (as well as of all similar indicators) is too large for reliable calibration [77] . Finally, contrary to market practice, Nakamichi continued to use the proprietary, non-standard designations EX, SX and ZX for tapes of types I, II and III [78] .
Tape Drive
The main goal of Nakamichi designers has traditionally been sound quality, sometimes at the expense of ease of use [79] . In the framework of this philosophy, a “discrete” configuration of three physically separate heads (discrete three heads) was born, each of which was adjusted independently of the others [80] . Then, a typical two-shaft, asymmetric tape drive mechanism with “resonance distribution” (asymmetric diffused resonance transport) [18] and a device for removing the tape press-in unit integrated into the cassette from the back surface of the tape (pressure pad lifter), which reduces unwanted modulation noises [81] [82 ], were developed [82 ] ] .
In the Dragon model, for the first time in the history of the company, a direct drive of both tonals from brushless electric motors was used [83] . The tonals themselves, as before, had unequal diameters, and their flywheels had unequal masses [84] . The speed of rotation of the tonewels stabilized by the reference quartz generator was chosen so that for any direction of pulling the tape, the back (braking) capstan was 0.2% behind the front (pulling) one, which provided the necessary tension of the tape in the tape channel and partially insulated it from cartridge cases [85] .In total, there were five electric motors in the Dragon CVL: two in the drive of the tonewels, the third in the drive of the receiving and feeding units, the fourth in the drive of the NAAC system and the fifth - in the drive for raising and lowering the head block (in place of the usual solenoid ) and pressure rollers [86] [ 87] . Both pressure rollers are “encircled” by sectorial tape guides forming their own tape drive channel (in conventional, non-reverse two-shaft decks, one such guide is used).
«Дискретные» (механически, электрически и магнитно независимые [88] ) головки стирания, записи и воспроизведения имели заявленный ресурс 10 000 часов [89] . На периферии их контактных поверхностей выполнены утопленные каналы — это решение, заимствованное из практики студийной звукозаписи, существенно замедлило износ головок [90] [91] . Сердечники головок записи и воспроизведения выполнены из фирменного «кристаллоя» (crystalloy), стирающая головка — комбинированная феррит - сендастовая c двойным [комм. 13] магнитным зазором [93] . Двухканальная головка записи имеет магнитные зазоры шириной 3,5 мкм , шестиканальная головка воспроизведения — 0,6 мкм [94] , что соответствует теоретической верхней границе воспроизводимых частот 40 кГц [95] .
Звуковой тракт
Тракт воспроизведения Nakamichi Dragon содержит шесть идентичных усилителей воспроизведения (УВ): два обслуживают воспроизведение вперёд, два — воспроизведение назад, и ещё два УВ усиливают фазоразностный сигнал, управляющий системой регулировки «азимута» [96] . Каждый из шести усилителей — впервые в практике Nakamichi [комм. 14] — построен по схеме активного фильтра на связке полевого транзистора и операционного усилителя [96] . Охватывающая их петля обратной связи формирует низкочастотную ветвь стандартной кривой воспроизведения IEC и частично — её высокочастотную ветвь [96] . Сигналы с выходов УВ, пройдя через коммутатор выбора направления (вперёд или назад) на КМОП-ключах , поступают в блок шумопонижения, где дополнительно усиливаются ещё одной парой ОУ и подвергаются окончательной высокочастотной коррекции; именно на этом этапе происходит выбор высокочастотной постоянной времени — 70 или 120 мкс [96] . Компандер Dolby B/C выполнен на четырёх микросхемах NE652 (две в тракте записи и две в тракте воспроизведения) [96] . Аналогичное построение аналоговых трактов было применено позже в модели CR7 [97] .
Ручная настройка тракта записи на используемую ленту («калибровка») проводится раздельно по каналам, по той же схеме, что и в ZX-7 и ZX-9: вначале по образцовому сигналу 400 Гц выставляется опорный уровень записи, затем по сигналу 15 кГц выставляется оптимальный ток подмагничивания [98] [99] . Оптимальный «азимут» устанавливается системой NAAC в начале цикла «калибровки». По отзывам обозревателей, ручная настройка Dragon не уступает в точности полностью автоматизированным декам конкурентов, но при этом занимает значительно большее время [100] .
Автоматическая коррекция перекоса
Система автоматической коррекции перекоса NAAC не запоминает характеристики кассет: после каждой смены направления воспроизведения, а также после нажатия кнопки выгрузки кассеты автоматика возвращает головку воспроизведения в стандартное положение, и именно из стандартного положения начинается воспроизведение новой кассеты [101] . NAAC включается немедленно и работает непрерывно и в режиме записи, и в режиме воспроизведения [101] . При изначально малом, несущественном рассогласовании головка остаётся неподвижной [101] . Поиск оптимального «азимута» обычно проходит незаметно для слушателя [102] : индикатор работы NAAC включается только во время грубого поиска «азимута», и никак не сообщает пользователю о фактической величине перекоса. Пользователь не может узнать, насколько воспроизводимые кассеты отклоняются от стандарта [103] .
В отличие от спецификации патента 1981 года, автоматика реального Dragon работает в полосе частот от 3 до примерно 15 кГц [104] . При недостаточной мощности высокочастотных составляющих автоматика работает неустойчиво [101] ; при воспроизведении тестовых сигналов с частотой 20 кГц и выше, а также быстро меняющихся свип-сигналов (в реальных фонограммах такие сигналы не встречаются [105] ) она неуверенно « рыскает » в поисках оптимального «азимута» [106] . При воспроизведении музыкальных фонограмм c достаточной долей высокочастотных составляющих Dragon устанавливает оптимальный «азимут» за 1…5 с , а погрешность его установки, по измерениям американского журнала Audio, не превышает одной угловой минуты [107] .
Независимые тесты
Характеристики ЛПМ
Заявленный производителем коэффициент детонации Dragon — 0,019 % средневзвешенный среднеквадратический и 0,04 % средневзвешенный пиковый — был для своего времени рекордно низким [108] , вдвое меньше коэффициента детонации модели 1000 ZXL [109] . Испытания в независимых лабораториях подтвердили эти значения [110] [111] [112] ; комментатор журнала Stereo Review предположил, что результаты измерений характеризуют не столько Dragon, сколько студийный магнитофон, на котором записывалась измерительная лента [113] . Несколько лет спустя конкуренты — ASC [комм. 15] , Onkyo, Studer, TEAC — подтянулись к уровню Nakamichi [115] , но сам этот уровень по-прежнему считался исключительно низким [116] [117] . Долговременная стабильность скорости воспроизведения Dragon, как и у всех дек с кварцевой стабилизацией, была отличной [118] , но сама скорость испытанных образцов (что также было типично для дек высшего уровня [115] ) превышала номинальные 4,76 см/с на 0,2 [115] … 0,5 % [119] .
Динамический диапазон
В сравнительных тестах 1980-х годов Dragon уверенно выигрывал у конкурентов в динамическом диапазоне. По данным Stereo Review, его невзвешенное отношение сигнал/шум для лент тип I, II и IV составляло 54, 56,5 и 59 дБ соответственно, что на 4—5 дБ превосходило показатели Tandberg 3014 и Revox B215 [120] . При этом благодаря меньшей доле высокочастотных составляющих шум Dragon был субъективно комфортнее шума дек-конкурентов [121] . Запас по перегрузке (HLD 3 — уровень записи среднечастотного сигнала, при котором коэффициент третьей гармоники достигает 3 % ) составлял для тех же лент +7,2, +4,2 и +8,2 дБ относительно уровня Долби — немногим больше, чем у Tandberg 3014 [122] , и значительно больше, чем у Revox B215 на лентах тип I и IV (+3,1, +4,2, +4,0 дБ) [123] .
Частотный диапазон
Нижняя граница диапазона воспроизводимых частот Dragon, независимо от уровня сигнала и типа ленты, составляет примерно 11…12 Гц (по критерию ±3 дБ) [124] . Производитель утверждал, что благодаря особому профилю сердечников магнитных головок Dragon полностью подавляет низкочастотные резонансы ( англ. poletip resonance, head bump ) [125] , но в действительности это верно только для канала воспроизведения [126] . В канале записи, вопреки декларации Nakamichi, наблюдается характерная гребёнка выбросов и провалов амплитудно-частотной характеристики (АЧХ) [127] [128] . Самый нижний, и наиболее мощный резонансный выброс лежит в инфразвуковой области, в окрестности частоты 15 Гц [129] . Для его подавления предусмотрен отключаемый заграждающий фильтр инфранизких частот, работающий только при записи [130] .
При записи и воспроизведении слабых сигналов ( -20 дБ ) верхняя граница диапазона воспроизводимых частот составляет, в зависимости от типа ленты, от 22 до 24 кГц [124] . Эти величины, заметно уступающие рекордным показателям Nakamichi 1000 ZXL (от 26 до 28 кГц [131] ), типичны для дек флагманского уровня: все модели этого класса гарантировали частотный диапазон не хуже 20…20 000 Гц на лентах всех типов [132] . Верхняя граница частотного диапазона имела большое, подчас преувеличенное, значение на рынке любительских магнитофонов; на профессиональном уровне её конкретные величины уже не представляли интереса [133] . Более важным было то, что Dragon отлично справлялся и с сигналами высокого уровня: при записи со стандартным уровнем Долби верхняя граница частотного диапазона для лент тип I, II и IV составляла 12,0, 10,6 и 15,2 кГц соответственно [128] [134] .
Дискуссия о частотной коррекции
Обозреватели, инструментально исследовавшие АЧХ канала воспроизведения Dragon, отмечали её нестандартный вид на верхней октаве звукового диапазона [119] [135] . При воспроизведении измерительных лент приборы регистрировали в этой области подъём АЧХ [119] , достигавший +4 дБ на отметке 18 кГц [136] . Журналисты предположили, что некоторые записи, сделанные на других магнитофонах, могут звучать на Dragon неестественно ярко [137] или даже неприятно [138] ; обозреватель британского Hi-Fi Review счёл, что большинство лент от подобного искажения АЧХ лишь выиграло бы [139] . Отмеченное явление, как хорошо знали обозреватели, было старым «фирменным секретом» Nakamichi [140] [141] .
Дискуссия о нестандартной, как утверждали критики [142] , АЧХ прошла в американской прессе в 1981—1982 годы, незадолго до начала продаж Dragon [комм. 16] . Проблема высокочастотной коррекции восходила к формулировкам стандарта МЭК-94 (1978 год), основанного на разработках Philips 1960-х годов. Согласно стандарту, основной энергетической характеристикой измерительных лент был остаточный магнитный поток записанных на них сигналов [143] [144] . Измерить его непосредственно нельзя, но можно измерить уровень напряжения на обмотке головки воспроизведения, а затем сделать поправку на потери в самой головке. Расчёт поправочного коэффициента в области высоких частот, в свою очередь, затруднён множеством физических явлений второго порядка [145] . В примитивных массовых головках 1970-х годов вклад этих явлений был столь велик, что более-менее точный расчёт был практически невозможен. Поэтому МЭК разрешила производителям измерительных лент оперировать не магнитным потоком, но непосредственно напряжением на обмотке образцовой головки [146] . Для того, чтобы выровнять АЧХ этого напряжения, измерительные ленты записывались с предварительным подъёмом высоких частот, компенсирующим потери в образцовой головке МЭК [147] . Сама же эта головка к 1982 году устарела, и вместе с ней устарели рассчитанные на её характеристики ленты [148] .
Nakamichi последовательно придерживалась обратного подхода: потери в головке воспроизведения следует компенсировать исключительно в воспроизводящем тракте [142] . Предыскажения при записи эталонной ленты должны компенсировать только потери в тракте записи; любые иные манипуляции с эталонным сигналом недопустимы. Расчёт потерь в головках Nakamichi, утверждали конструкторы фирмы, не представлял сложности [149] . Как следствие, собственные эталонные ленты Nakamichi, буквально следовавшие формулировкам МЭК-94, и тракты записи магнитофонов Nakamichi были «тусклыми», а тракты воспроизведения — более «яркими» по сравнению с изделиями Tandberg [150] и других конкурентов, ориентировавшихся на измерительные ленты старого образца [151] [152] .
Обозреватели, поддержавшие позицию Nakamichi, отмечали фактическое отсутствие на рынке полноценных измерительных лент. Классические [комм. 17] эталонные ленты Philips изготавливались по устаревшей технологии и записывались в расчёте на устаревший, нестандартный вариант коррекции АЧХ в области низких частот [153] . Измерительные ленты TDK отличались неприемлемо большим разбросом характеристик [154] . Ленты для регулировки «азимута» в действительности записывались со значительными, непредсказуемыми перекосами [155] [156] . Ленты для регулировки чувствительности и АЧХ записывались с недокументированными предыскажениями в высокочастотной области, в нарушение неявных требований МЭК-94. Поддержал Nakamichi и уполномоченный МЭК производитель измерительных лент — компания BASF . По утверждению представителя компании, характеристики магнитофонов Nakamichi полностью соответствовали характеристикам новейших на то время (декабрь 1981 года) эталонных лент BASF [157] .
Совокупная оценка
Журналисты и эксперты 1980-х годов единодушно признавали Dragon лучшим кассетным магнитофоном из когда-либо поступавших на испытания [158] . В обзорах западногерманского журнала Audio и американского Stereo Review обозреватели поставили на один уровень с Dragon лишь вышедший тремя годами позже Revox B215 [54] [159] . Уровень, заданный Nakamichi, оказался недосягаем для конструкторов ASC, Tandberg и TEAC [56] . Вопрос о том, какая из флагманских дек Nakamichi была лучшей, не имеет однозначного ответа. 1000 ZXL была самой сложной технически, CR-7 и Dragon были примерно сопоставимы по качеству звучания, но лишь Dragon имел автореверс и автоматическую коррекцию перекоса [160] [68] .
Две эти функции превратили Dragon из прецизионного инструмента для звукозаписи в универсальный «всеядный» плеер [161] . Простота использования и лёгкость, с которой Dragon «переваривал» кассеты самого разного происхождения, заинтересовала множество состоятельных клиентов- яппи и закрепила за ним репутацию лучшего в мире, желанного, статусного товара [162] [163] . В 1990-е годы, по мере угасания формата компакт-кассеты и самой компании, вокруг её продукции сложился культ ценителей «легендарной» [164] «теплоты Nakamichi» [165] . В среде аудиофилов магнитофоны Nakamichi заняли место, сравнимое с или ламповым тюнером Marantz 10B [166] . Уже к 1998 году, на заре интернетa , в сети сложились первые сообщества коллекционеров и мастеров по ремонту и обслуживанию Dragon [167] .
В XXI веке репутацию Nakamichi Dragon поддерживают и коллекционеры-любители, и множество торговцев на интернет-площадках [168] . Однако, по мнению критиков, распространившееся в среде любителей мнение об исключительных достоинствах Dragon не выдержало проверки временем: сверхсложный лентопротяжный механизм на практике оказался ненадёжным [169] . Квалифицированных мастеров, способных восстановить Dragon, немного, а единственным источником запасных частей служат окончательно пришедшие в негодность магнитофоны [170] . Стоимость восстановительного ремонта в XXI веке может быть сопоставима с ценой, по которой продавался Dragon в 1980-е годы [170] .
Comments
- ↑ 1 2 Граница между профессиональной и бытовой кассетной аппаратурой размыта. Основные характеристики, отличавшие профессиональные модели — надёжная конструкция механизма, возможность оперативной ручной настройки амплитудно-частотной характеристики в режиме воспроизведения и угла установки («азимута») головки воспроизведения, наличие балансных выходных разъёмов, и соответствие минимальным требованиям к частотному диапазону, коэффициенту детонации и скорости протяжки ленты [2] .
- ↑ 1 2 Стандарт компакт-кассеты был разработан в расчёте на использование универсальных магнитных головок, и не предусматривал места для установки раздельных головок записи и воспроизведения [9] . Большинство производителей дек со сквозным каналом обошли это ограничение путём установки двух головок в компактную общую обойму («сэндвич»), занявшую место универсальной головки. Компания Nakamichi выбрала иной путь — установку в то же место двух раздельных («дискретных») головок.
- ↑ Двухвальный механизм — непременный спутник трёхголовочной компоновки. Именно он, благодаря разнице скоростей вращения переднего (тянущего) и заднего (тормозящего) валов, гарантирует прилегание ленты к головке записи [10] . Прилегание ленты к головке воспроизведения обычно возлагается на встроенное в кассету фетровое лентоприжимное устройство (которое может обслуживать только одну головку) [11] .
- ↑ Все кассетные магнитофоны, за исключением самых простейших и самых миниатюрных, имеют регулировочные винты для периодической юстировки магнитных головок по эталонной ленте или на слух. Однако для оперативной настройки эти винты не предназначены.
- ↑ В середине 1970-х годов компания поддержала разработку системы шумоподавления High-Com, и в конце 1970-х годов выпустила ограниченной серией шумоподавители этой системы [19] [20] . В 1979 году Nakamichi выпустила двухскоростные модели 680 и 680ZX, с возможностью записи и воспроизведения на половинной скорости ( 2,38 см/с ) [21] , и так далее.
- ↑ Степень завала нелинейно зависит от скорости протяжки ленты и ширины магнитной дорожки. В наибольшей степени страдают от перекоса именно кассетные магнитофоны [28] .
- ↑ Точные значения функции затухания зависят от начальных условий, главным из которых является ширина магнитного зазора головки. Источники её не называют, но из графиков видно, что речь идёт о высококачественных головках, способных воспроизводить частоты выше 20 кГц .
- ↑ Компания International Tapetronics (ITC), она же American Tapetronics (ATC) с 1958 года производила специализированные магнитофоны для радиостанций и телевидения, использовавшие крупногабаритные кассеты . Джон Дженкинс — один из основателей компании, адаптировавший картридж под нужды профессиональных клиентов [44] . В 1981 году ITC была поглощена компанией 3M [45] , в 1990 году 3M продал ITC инвесторам из Канады. К концу 1990-х годов бизнес угас, уступив новейшим цифровым устройствам [44] .
- ↑ Слово «сэндвич», более уместное по смыслу, имеет в магнитной записи иное, чётко определённое значение — так называют сблокированные головки записи и воспроизведения, жёстко запрессованные в общую обойму [47] .
- ↑ Лучшие баллы ожидаемо получили Nakamichi Dragon и Revox B215 . Другими участниками теста, занявшими промежуточные места, были ASC AS3001, Beocord 9000, Onkyo TA-2900, Tandberg 3014 и TEAC Z7000 [54] .
- ↑ Nakamichi CR-7 выставляла оптимальный «азимут» и в ходе автоматической настройки («калибровки») [62] .
- ↑ According to the recollections of Paul Wilkins, co-owner and commercial director of Bowers & Wilkins , the British partner of Nakamichi, for twenty years Nakamichi sold about 130 thousand cassette decks of all models in the UK in twenty years [67] [68] .
- ↑ When a conventional head erases it once, the “rewriting effect” is observed: the signal recorded earlier on the tape is “overwritten” by the erasure current over the seemingly erased tape. Double gap erase heads erase each section of the tape twice, thereby suppressing the rewrite effect [92] .
- ↑ In previous Nakamichi models, including the ZX-7 and ZX-9, and in subsequent low-level models, HCs were used on transistor twos with field or bipolar input transistors.
- ↑ ASC (Audio System Componenten) is a West German manufacturer of high-class sound equipment (1975-1990) [114] .
- ↑ During this discussion, Nakamichi released a special brochure - Nakamichi Cassette Equalization: The Standard View . - Nakamichi, 1982. , - Including the presentation of their own position and journal publications of friendly (or at least sympathizing) authors.
- ↑ Philips, as the developer of the compact cassette standard and the owner of exclusive rights to its specification, has been historically the only official supplier of measuring tapes. By 1982, this role was transferred to BASF and TEAC .
Notes
- ↑ 1 2 Sabin, 2018 , p. one.
- ↑ 5.4.5 Replay equipment: Professional Cassette Machines . International Association of Sound and Audiovisual Archives (IASA).
- ↑ Rumsey and McCormick, 2006 , p. 178: "... invented by Philips and launched in 1963."
- ↑ Rumsey and McCormick, 2006 , p. 178.
- ↑ Short, 2011 , "For Nakamichi 'the brand' it all started in 1973 when they turned the audio world on its head ...".
- ↑ Eisenberg and Feldman, 1981 , p. 75: "The 1000 was literally unprecedented for a cassette machine ...".
- ↑ Short, 2011 , "when it's peers were struggling to better 12K with normal and 14k with chrome tape ...".
- ↑ 1 2 Eisenberg and Feldman, 1981 , p. 75: "... extended response to 20 kHz, three separate heads ...".
- ↑ Rumsey and McCormick, 2006 , p. 179: "... no provision was made for a third head ...".
- ↑ Rumsey and McCormick, 2006 , p. 179: "No pressure pad is provided for this, and the machine transport needs to be up to the task ...".
- ↑ Rumsey and McCormick, 2006 , p. 179: "Such an arrangement ensures very consistent tensioning ...".
- ↑ Short, 2011 , "a number of firsts in the world of the cassette recorder: a dual capstan transport ...".
- ↑ Short, 2011 , "1980 saw the range continue as above, but also marked the unleashing of the mother of all cassette decks, the computing 1000ZXL ...".
- ↑ Short, 2011 , "To this day the 1000ZXL is probably the highest performing cassette deck ever released ...".
- ↑ Eisenberg and Feldman, 1981 , p. 75: "If you care to make a scrupulous comparison ...".
- ↑ Berger, Ivan. The World's Most Expensive Cassette Deck // Audio (USA). - 1982. - No. September . - P. 42-43.
- ↑ Short, 2011 , "1978 saw the most ground breaking of Nakamichi's technological developments: the modular, diffused resonance, asymmetric dual capstan transport."
- ↑ 1 2 Wilkins, 2015 , "These were combined with Nakamichi's dual capstan ...".
- ↑ Short, 2011 , "Lastly, there was the introduction of the add on High-Com and then High Com II NR units ...".
- ↑ Schoder, Ernst. Die Geschichte von HIGH COM . - 2010.
- ↑ Short, 2011 , "Then there were the two speed 680 and 680ZX's, not 2x speed, as others were to flirt with, but half speed - 15 / 16ips ...".
- ↑ Wilkins, 2015 , “what sets Nakamichi cassette decks apart from their rivals. No bells and whistles; just sound design and engineering. "
- ↑ Wilkins, 2015 , “Nakamichi never used HX-PRO or Dolby-S.”
- ↑ 1 2 Kozyurenko, 1998 , p. 69: "Mechanical shock during multiple coups ...".
- ↑ 1 2 3 Hirsch and Stark, 1983 , p. 38: "No matter how carefully you align the playback head for one side ...".
- ↑ Hirsch and Stark, 1983 , p. 38: "... exactly perpendicular to the axis of the tape."
- ↑ Hirsch and Stark, 1983 , p. 38: "azimuth error, the result of which is a loss in high frequency response."
- ↑ 1 2 Burstein, 1984 , p. 42: Table 1.
- ↑ Nakamichi CR7 Brochure, 1986 , "Figure 6 (above) graphs the loss as a function of frequency ...".
- ↑ Burstein, 1984 , p. 42: "For a cassette system to maintain fairly good response ...".
- ↑ Nakamichi CR7 Brochure, 1986 , "With a more typical error - 10 'or 1/6-degree ...".
- ↑ Hirsch and Stark, 1983 , p. 38: "cassette shells are notoriously imperfect ...".
- ↑ Hirsch and Stark, 1983 , p. 38: "... varies somewhat as the tape plays through a single side."
- ↑ Burstein, 1984 , p. 46: "Reverse cassette operation presents an extra azimuth problem ...".
- ↑ Nakamichi Dragon OM, 1982 , p. 9: "... which tended to be a problem in auto-reverse systems ...".
- ↑ Burstein, 1984 , p. 46: "One solution is to use two gaps instead of four ...".
- ↑ Kozyurenko, 1998 , p. “The problem of creating a through channel is placement ...”
- ↑ Burstein, 1984 , p. 46: "This requires an accurate test tape ...".
- ↑ Hirsch and Stark, 1983 , p. 38: "Even if a deck's head gaps are perfectly aligned ...".
- ↑ Hirsch and Stark, 1983 , p. 38: "... Nakamichi decks have for some years provided either manual or automatic recording-head azimuth adjustment."
- ↑ Hirsch and Stark, 1983 , p. 38: "But this system ... cannot help with prerecorded tapes."
- ↑ 1 2 3 Nakamichi, Niro. United States Patent 4639812. Magnetic head and apparatus for automatically adjusting the azimuth position thereof . Unites States Patent Office (1987).
- ↑ 1 2 3 Hirsch and Stark, 1983 , p. 38.
- ↑ 1 2 Rector A. Tape Cartridge Machine History . Americanradiohistory.org (May 2, 2014).
- ↑ 3M to Acquire Tape Company // The New York Times. - 1981. - No. December 22 .
- ↑ Jenkins, John. United States Patent 4101937. Automatic azimuth control for magnetic tape recording and reproducing apparatus . Unites States Patent Office (1978).
- ↑ Kozyurenko, 1998 , "... in everyday life such a design was called the sandwich."
- ↑ Rijkaert, A. et al. United States Patent 4317144. Azimuth correction of head gaps . Unites States Patent Office (1982).
- ↑ Rijkaert, A. et al. United States Patent 4451862. Magnetic head mounting mechanism for automatic azimuth control . Unites States Patent Office (1984).
- ↑ GOST 24863-87, clause 2.1.5, drawing 3.
- ↑ Stark, 1988 , p. 52: "... the Dragon, indeed, dates to November 1982."
- ↑ Marantz SD-930 . Date of appeal April 24, 2019.
- ↑ 1 2 3 Nakamichi Dragon . The Vintage Knob. Date of appeal April 24, 2019.
- ↑ 1 2 3 Feld, 1985 , p. 84.
- ↑ 1 2 Guzman, Carlos. The Fabled Nakamichi Dragon (2015). Date of treatment April 22, 2019 . The author is the founder and owner of recording and replicating cassette studios, a 2001 Grammy winner as part of The Legends.
- ↑ 1 2 Wienforth U. Vier Assen trumpfen auf // Audio (Germany). - 1983. - No. November . - S. 68: "den neuen Maßstäben eines Nakamichi Dragon orientiert, verwehrt ihm den Schritt auf diese oberste Qualitätsstufe."
- ↑ Burstein H. Tape Guide: Azimuth Control // Audio (USA). - 1988. - No. May . - P. 8: “The only cassette deck I know of that ...”.
- ↑ Nakamichi Dragon-CT turntable // Audio (USA). - 1985. - No. April . - P. 62.
- ↑ Sabin, 2018 , “Fairly quickly, the complex and costly mechanics of NAAC technology ...”.
- ↑ Greenleaf, Cristopher and Hirch, Julian. Car stereo. Nakamichi TD-1200 // Stereo Review. - 1983. - No. December . - P. 52–55.
- ↑ Sabin, 2018 , “RX series of UDAR (Uni-Directional Auto Reverse) decks, which mechanically flipped the cassette ...”.
- ↑ 1 2 Nakamichi CR7 OM, 1986 , p. eight.
- ↑ Stark, 1988 , p. 52: "... world-class cassette decks are no longer economical to design."
- ↑ Stark, 1988 , p. 52: "... concession to the relatively small proportion of prospective buyers ...".
- ↑ Stark, 1988 , p. 52: "The scientists who might have found them have been moved on to newer projects like DAT."
- ↑ Sabin, 2018 , "... finally exiting the market in 1993 after an 11-year run."
- ↑ Wilkins, 2015 , "... around 130,000 Nakamichi cassette decks sold in the UK."
- ↑ 1 2 Keywood, 1986 , "Only the more modern Nakamichi model (eg CR-7E) can serve as the only replacement for Dragon ...".
- ↑ Wilkins, 2015 , "1996 was the last year of production of the DR-Series ...".
- ↑ Sabin, 2018 , “... digital audio tape (DAT) format it banked its future on failed to gain traction with consumers”.
- ↑ Willis, B. Nakamichi Seeks Protection // Stereophile. - 2002. - No. February 24 .
- ↑ Hirsch and Stark, 1983 , p. 39: "... arranged somewhat like rows of shingles on a roof ...".
- ↑ Roberson, 1983 , p. 70: "All controls and switches were completely reliable ...".
- ↑ Hirsch and Stark, 1983 , p. 40: "True, we could pick nits ...".
- ↑ Hirsch and Stark, 1983 , p. 40: "The viewing area in the cassette-well door is too small ...".
- ↑ Roberson, 1983 , p. 70: "However, the small black pushbuttons blended into the panel ...".
- ↑ Hirsch and Stark, 1983 , p. 40: "That of the Dragon is annoyingly imprecise ...".
- ↑ Roberson, 1983 , p. 67: "Unfortunaltely these are marked with Nakamichi's own tape designations ...".
- ↑ Wilkins, 2015 , “The cassette decks were built with a design philosophy of performance first, convenience second.”
- ↑ Wilkins, 2015 , "... allowing accurate individual alignment for optimum results."
- ↑ Wilkins, 2015 , "To improve this further, a pad lifter was fitted to the play head ...".
- ↑ Stark, 1988 , p. 40: "The casssete's pressure pad is actually pushed back and away ...".
- ↑ Roberson, 1983 , p. 67: "... unusual in that the each capstan is driven directly."
- ↑ Stark, 1988 , p. 54: "Flywheel masses and capstan diameters have been selected to prevent commons resonance.".
- ↑ Roberson, 1983 , p. 67: "The supply capstan (in either direction) runs 0.2% slower ...".
- ↑ Stark, 1988 , p. 54: "The Dragon's transport uses a total of five motors ...".
- ↑ Keywood, 1986 , “Five engines are involved in the Nakamichi Dragon LPC ...”
- ↑ Wilkins, 2015 , "... physically, electrically and magnetically independent ...".
- ↑ Nakamichi Dragon Brochure, 1982 , p. 5: "... our heads have a useful life of more than 10,000 hours."
- ↑ Hirsch and Stark, 1983 , p. 38: "The near and far edges of head faces are slotted ...".
- ↑ Stark, 1988 , p. 54: "Unique to Nakamichi is the use of an old professional open-reel trick ...".
- ↑ Watkinson, 2012 , p. 317: "two erase processes effectively eradicate re-recording phenomenon."
- ↑ Nakamichi Dragon Brochure, 1982 , p. 5: "... dual gap Ferrite-Sendust erase head."
- ↑ Hirsch and Stark, 1983 , p. 38: "3.5 and 0.6 micrometers respectively."
- ↑ Hoff, 1998 , p. 134: "the relevant equation is ... f = v / 2g."
- ↑ 1 2 3 4 5 Nakamichi Dragon SM, 1982 , 7.3. Amplifier Section.
- ↑ Nakamichi CR7 SM, 1986 , 8.2.2. Amplifier Section.
- ↑ Nakamichi Dragon OM, 1982 , p. ten.
- ↑ Roberson, 1983 , p. 67: "To the right of the control buttons are the calibration controls ...".
- ↑ Roberson, 1983 , p. 67: "The Dragon calibration procedure is slower than the automatic setups ...".
- ↑ 1 2 3 4 Nakamichi Owner's Manual, 1983 , p. 9.
- ↑ Hirsch and Stark, 1983 , p. 40: "you have to listen very carefully to note the restoration of high frequencies."
- ↑ Hirsch and Stark, 1983 , p. 40: "... to have some indication as to the degree of misalignment in our prerecorded tapes ...".
- ↑ Roberson, 1987 , p. 66: "The bandpass filter restricts signals to the range from about 3 kHz to a bit above 15 kHz."
- ↑ Roberson, 1983 , p. 69: "This was also, of course, a non-musical condition."
- ↑ Roberson, 1983 , p. 69: "... the NAAC might do some hunting with a test signal of 20 kHz or so ...".
- ↑ Roberson, 1983 , p. 68: "... equivalent to an azimuth accuracy of better than 1 '."
- ↑ Hirsch and Stark, 1983 , p. 39: "the lowest we have ever measured."
- ↑ Eisenberg and Feldman, 1981 , p. 76: "0.08% peak (specification) 0.05% (measured)."
- ↑ Hirsch and Stark, 1983 , p. 39: "0.016 per cent weighted rms and 0.024 per cent DIN peak-weighted."
- ↑ Roberson, 1983 , p. 69: "0.014% or less wtd rms and 0.028% or less wtd peak."
- ↑ Stark, 1988 , p. 39: "0.015% and 0.026%."
- ↑ Hirsch and Stark, 1983 , p. 39: "We suspect that this might be the residual level of the test tape itself."
- ↑ Übersicht ASC-HiFi-Geräte . Michael Herberts (August 13, 2012).
- ↑ 1 2 3 Feld, 1985 , p. 82: Audio-Messprotokol.
- ↑ Stark, 1988 , p. 58: "... extraordinarily low, the best I've measured."
- ↑ Keywood, 1987 , p. 72: "... flutter down to an all time low."
- ↑ Roberson, 1983 , p. 69: "less than 0.005%."
- ↑ 1 2 3 Keywood, 1987 , p. 72.
- ↑ Stark, 1988 , pp. 56-57: Laboratory Measurements.
- ↑ Stark, 1988 , p. 58: "especially high-frequency noise ...".
- ↑ Roberson, Howard. Tandberg TCD 3014 Cassette Deck // Audio (USA). - 1984. - No. September . - P. 60: Table III.
- ↑ Roberson, Howard. Revox B215 Cassette Deck // Audio (USA). - 1985. - No. July . - P. 50: Table III.
- ↑ 1 2 Roberson, 1984 , p. 70: Table I.
- ↑ Nakamichi Dragon Brochure, 1982 , p. 5: "... suppresses low-frequency 'head bumps' completely ...".
- ↑ Hirsch and Stark, 1983 , p. 39: Playback response chart.
- ↑ Hirsch and Stark, 1983 , p. 39: Record-playback response chart.
- ↑ 1 2 Roberson, 1987 , p. 68: Figure 1. Frequency responses.
- ↑ Keywood, 1987 , p. 72: "... a bass peak at 15 Hz ...".
- ↑ Keywood, 1987 , p. 72: "... for which there's a sub-sonic notch filter."
- ↑ Eisenberg and Feldman, 1981 , p. 70: "out to 26 kHz for normal bias ...".
- ↑ Stark, 1988 , p. 58.
- ↑ Feldman, Len. The Revox B215 - An Elegant Cassette Deck From Swiss Craftsmen // Modern Electronics. - 1986. - No. June . - P. 15.
- ↑ Hirsch and Stark, 1983 , p. 39: "Even at the 0-dB level, where all cassette types run into saturation ...".
- ↑ Hirsch and Stark, 1983 , p. 39.
- ↑ Hirsch and Stark, 1983 , p. 39: "... there is a clearly rising response ...".
- ↑ Hirsch and Stark, 1983 , p. 39: "slightly over-bright."
- ↑ Keywood, 1987 , p. 72: "almost unpleasantly bright."
- ↑ Keywood, 1987 , p. 72: "... most only benefit from this characteristic."
- ↑ Keywood, 1987 , p. 72: "... deviations that Nakamichi knowingly adopted."
- ↑ Hirsch and Stark, 1983 , p. 39: "... which we have found characteristic of Nakamichi decks."
- ↑ 1 2 Foster, 1981 , "Nakamichi, the one company that from time immemorial has compensated for playback losses in the playback EQ has frequently been accused of non-standard equalization ...".
- ↑ Long, 1982 , "The IEC wrote its primary specification in terms of flux density on the tape ...".
- ↑ Foster, 1981 , "The first amenment to the IEC Publication 94 defines the short-circuit flux ...".
- ↑ Ohba, 1982 , "The main differences between a real and an ideal head stem from ...".
- ↑ Long, 1982 , "The IEC specified elsewhere what heads would be considered standard ...".
- ↑ Long, 1982 , "Test tapes were devised to give flat results ...".
- ↑ Long, 1982 , "The IEC's standard heads in particular have become obsolete ...".
- ↑ Ohba, 1982 , "Play-head losses can be calculated quite accurately ...".
- ↑ Roberson, 1984 , p. 45: “The Tandberg is closer to the IEC reference playback head” and previous graphs.
- ↑ Long, 1982 , "Meanwhile, however, Nakamichi had calculated head behavior ...".
- ↑ Ohba, 1982 , "Nakamichi will appear to have too hot a high end ...".
- ↑ Long, 1982 , "The Philips tapes follow an older standard ...".
- ↑ Long, 1982 , "But when we changed to the TDK test tape ...".
- ↑ Long, 1982 , "There is no unanimity of azimuth among quality brands and hence no standard ...".
- ↑ Burstein, 1984 , p. 46: "Even for test tapes made by companies of high reputation ...".
- ↑ O'Kelly, 1981 , “The IEC calibration standard manufactured by BASF will show flat frequency response on all Nakamichi recorders ...”.
- ↑ Hirsch and Stark, 1983 , p. 40: "the finest cassette deck we have yet tested."
- ↑ Stark, 1988 , p. 58: "There were two fairly clear winners ...".
- ↑ Wilkins, 2015 , “But in the end, for sound quality it comes down to a straight choice between the Dragon and CR-7.”
- ↑ Short, 2011 , "again indicative of the playback bent ...".
- ↑ Short, 2011 , “However, the yuppies loved ...".
- ↑ Sabin, 2018 , “Among these, none was as heralded or lusted after as the Nakamichi Dragon.”
- ↑ Willis, 1998 , "no brandname can compete with Nakamichi for the much-abused title 'Legendary'" ... ".
- ↑ Willis, 1998 , “Like tube aficionados, Nak fanciers speak reverently about 'Nakamichi warmth' ...".
- ↑ Willis, 1998 , "Audio Research preamps, Marantz tuners, Linn turntables ...".
- ↑ Willis, 1998 , “Those fans have a home on the Internet: the Unofficial Nakamichi Cassette Deck Page ...”.
- ↑ Short, 2011 , "myth many fleabayers (eBay sellers) are keen to perpetrate to this day ...".
- ↑ Short, 2011 , “Dragon is unnecessarily complicated, and reliability suffers ...”.
- ↑ 1 2 Dorgay J. Old School: Nakamichi Dragon // ToneAudio. - 2014.
Literature
- Kozyurenko, Yu. I. Modern tape recorders, players, voice recorders and headphones. - M .: DMK, 1998 .-- ISBN 58988180087.
- Burstein H. How Important is Azimuth? // Audio (USA). - 1984. - No. September . - P. 40–43, 45–46.
- Hoff PH Consumer Electronics for Engineers. - Cambridge University Press, 1998. - (Wiley Series in Practical Strategy). - ISBN 9780521588171 .
- Realspin, Wilkins P. the Nakamichi story // ZStereo (UK). - 2015. - No. 30 October . Interviewed, Paul Wilkins is the son of co-founder and marketing director of Bowers & Wilkins , Nakamichi's partner company in the UK market.
- Roberson H. Compatibility in Tape Decks // Audio (USA). - 1984. - No. September . - P. 44-45.
- Rumsey F., McCormick T. Sound and Recording: An Introduction . - Taylor and Francis, 2006 .-- ISBN 9780240519968 .
- Sabin R. Vintage Test Report: Nakamichi Dragon Cassette Deck. Introduction // Sound & Vision. - 2018. - No. October 2 .
- Short M. Nakamichi. One man's journey through the world of cassetes // StereoNet (New Zealalnd). - 2011. - No. 5th August . (date of first publication see [1] )
- Watkinson J. The Art of Sound Reproduction . - CRC Press, 2012 .-- ISBN 9781136118548 .
- Willis B. An Online Treasure Trove for Nakamichi Cassette Deck Fans // Stereophile. - 1998. - No. August 9 .
Independent Reviews (1980s)
- Berger I. The World's Most Expensive Cassette Deck // Audio (USA). - 1982. - No. September . - P. 42-43.
- Eisenberg N. and Feldman L. Nakamichi 1000 ZXL Cassette Recorder // Modern Recording and Music (USA). - 1981. - Vol. 9, No. June . - P. 69-75.
- Hirsch J. and Stark C. Nakamichi Dragon Cassette Deck // Stereo Review (USA). - 1983. - No. April . - P. 38-40.
- Keywood N. Nakamichi Dragon // Hi-Fi Choice (UK). - 1986. - Vol. 47.
- Keywood N. Nakamichi Dragon // Hi-Fi Review Buying Guide (UK). - 1987 .-- P. 72.
- Keywood N. Nakamichi CR-7 // Hi-Fi Review Buying Guide (UK). - 1987. - P. 70-71.
- Roberson H. Nakamichi Dragon Cassette Deck // Audio (USA). - 1983. - No. May . - P. 66–70.
- Roberson H. Nakamichi ZX-7 Cassette Deck // Audio (USA). - 1982. - No. May . - P. 54-57.
- Stark C. 5 Top Tape Decks // Stereo Review (USA). - 1988. - No. March . - P. 52-58.
- Stark C. Nakamichi Dragon // Stereo Review Tape Recording and Buying Guide (USA). - 1984. - P. 40-42.
- Feld W. Alle mal herhören. Vergleichsest: acht Rekorder von 2000 bis 4500 Mark // Audio (Germany). - 1985. - No. Juni . - S. 78-84.
Producer Publications (1980s)
- Nakamichi Dragon Auto-Reverse Cassete Deck. - Tokyo: Nakamichi Corporation, 1982.
- Nakamichi Dragon Auto-Reverse Cassete Deck. Owner's Manual. - Tokyo: Nakamichi Corporation, 1982.
- Nakamichi Dragon Auto-Reverse Cassete Deck. Service Manual. - Tokyo: Nakamichi Corporation, 1982.
- Nakamichi Cassette Equalization: The Standard View. - Nakamichi, 1982. Includes documents and reprints of journal articles:
- Playback Equalization // Nakamichi Technical Bulletin. - Tokyo, 1981. - No. 2 .
- Foster E. Cassette equalization: the standard view // Audio Video International (Japan - USA). - 1981. - No. December .
- Long R. The High Price of Progress // High Fidelity (USA). - 1982. - No. February .
- Ohba K. Talk Back: The Flux in the Crux // Modern Recording and Music (USA). - 1982. - No. January .
- O'Kelly, Terence. Letter to the editor of Modern Recording and Music // Nakamichi Cassette Equalization: The Standard View. - Nakamichi, 1982.
- Nakamichi CR-7A Discrete Head Cassette Deck. - Tokyo: Nakamichi Corporation, 1986.
- Nakamichi CR-7A / CR-5A / CR-7 / CR-5 Discrete Head Cassete Deck. Owner's Manual. - Tokyo: Nakamichi Corporation, 1986.
- Nakamichi CR-7A / CR-5A / CR-7 / CR-5 Discrete Head Cassete Deck. - Tokyo: Nakamichi Corporation, 1986.